
Bhavani
blogs from Villupuram


As, mentioned in the previous post, there are similarities in the working of the 4 designs in session 3. For ease of comparison, let's place the 4 together. Look at the lines I've circled. They connect 1 block of pattern to the next. You can repeat the pattern any number of times using these connect...
Posted on 25 March 2014 | 8:06 am
Read postThis design is worked on a similar principle as all the designs in session 3. Locate a clear path for the onward journey. Work all the side-trips on your return journey. Here are the steps to tackling this pattern. Do note that this is not the only way. It's just the way I'd do it. Step 1: Start at...
Posted on 24 March 2014 | 9:30 am
Read postWorking this border is not as complicated as it might seem. Just identify the main trip and the side- trips. Remember, no overlaps. Step 1: The figure below shows the path I've chosen as my main trip. Yours need not be the same. But this, is the easiest path, and also the least confusing. It ends at...
Posted on 22 March 2014 | 4:48 pm
Read postI wondered if doing a video tutorial would be a better idea: then I decided to stick to my own style. I think my pictures are very clear and if at any time you have a doubt, referring to pictures is easier than referring to a Kutch work video tutorial. So here I am with my next batch of pictures. Th...
Posted on 5 February 2013 | 9:43 pm
Read postThe Interlacing - Method I Okay, now here are the steps to Method I. A word of caution. You'll have to put up with my bad photography while looking at the first few pictures. If this is the first time you are attempting Kutchwork, I'd suggest you go through the tutorials in my side bar before you at...
Posted on 25 January 2013 | 10:34 pm
Read postNote: I've used 6 strands of Anchor Stranded cotton for both the skeleton and the interlacing. I normally use a tapestry needle for the interlacing. The reason? When you use an ordinary sewing needle, chances of your needle snagging the yarn and pulling at the already laid skeleton are high. This re...
Posted on 25 January 2013 | 1:37 pm
Read post